CoreXY 3D Printer

3D Printers and 3D model designs
Post Reply
K6XTC
Site Admin
Posts: 14
Joined: Sat Oct 26, 2019 12:09 am

CoreXY 3D Printer

Post by K6XTC » Sun Oct 27, 2019 12:11 am

My second 3D printer design/build is a CoreXY. Still a work in progress.

Features
  • Duet wifi + Duex5 controller
  • Liquid cooled Kraken 4-color hot end
  • Bed supported by KD516 magnetic ball joints and 3 independent motors for true auto-leveling (not tramming)
  • Z axis endstop implemented using force resistors incorporated in the build surface support
  • 2020 aluminum profile frame
  • MGN12 linear rails with MGN12H bearing blocks
  • T8 lead screws
  • Build volume of 330mm x 376mm x 335mm (13" x 14.8" x 13.19")
  • Outside dimensions of 558mm x 559mm x 711mm (22" x 22" x 28")




5c6eb9cbfb824dd045e383188b060f60_preview_featured.jpg
9753b9accc1461a91025a05134caea01_preview_featured.jpg
4884ab5d837cde30969f8b24c093da86_preview_featured.jpg
bb62faad4feb6905dc27ebc59cdc17b3_preview_featured.jpg
8678dc3bb2c2c0fa3e53fe946f45468b_preview_featured.jpg
a6dcb4064f88c51062c6f81ed707def7_preview_featured.jpg
107e6146d164cbb11aefc6adf89cae4a_preview_featured.jpg
91b87a9e35aaf44b38efc96a97ad2f3e_preview_featured.jpg
1ff372fdc378222a5fc6e5521fa91455_preview_featured.jpg

K6XTC_CoreXY_Printer.zip
CoreXY Auto-bed-Level Test.mp4
Automatic bed leveling test
You do not have the required permissions to view the files attached to this post.

Post Reply